Main Products
- Polycarboxylic antiscale and dispersant
- Polyacrylic Acid (PAA)
- Polyacrylic Acid Sodium (PAAS)
- Hydrolyzed Polymaleic Anhydride (HPMA)
- Copolymer of Maleic and Acylic Acid (MA/AA)
- Acrylic Acid-2-Acrylamido-2-Methylpropane Sulfonic Acid Copolymer (AA/AMPS)
- Acrylic Acid-2-Hydroxypropyl Acrylate Copolymer (T-225)
- Acrylic Acid/Acrylate/Phosphonic Acid/Sulfosalt Tetra-copolymer (TH-241)
- TH-613 Acrylic-acrylate-sulfosalt copolymers
- Copolymer of Phosphono and carboxylic Acid (PCA)
- TH-1100 Sodium Polyacrylate
- TH-2000 Modified Sodium Polyacrylate
- TH-3100 carboxylate-sulfonate-nonion tri-polymer
- TH-904 aqueous dispersant
- Polycarboxylic Acid Water-Reducing Agent
- Polyepoxysuccinic Acid (PESA)
- Sodium of Polyaspartic Acid (PASP)
- Organophosphoric Antiscale and Corrosion Inhibitors, Chelants
- Organophosphoric Salts
- Bactericide and Algicide
- Built Scale & Corrosion Inhibitors and Pretreatment Filming Agents
- Corrosion Inhibitor
- Reverse Osmosis Chemicals
poly(maleicacid)
CAS No. 26099-09-2
Structural Formula:
Properties:
poly(maleicacid) is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330℃. poly(maleicacid) has obvious threshold effect under high temperature (350℃) and high pH（8.3）level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300℃ with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, poly(maleicacid) is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, poly(maleicacid) has good corrosion inhibition effect when used together with zinc salt. poly(maleicacid) can also used as additives for cement.
Specification:
| items | index |
| Appearance | Pale yellow to umber transparent liquid |
| Solid content % | 48.0 min |
| Bromine value mg/g | 80.0 max |
| Average molecular weight | 450 min |
| pH(1% solution) | 2.0-3.0 |
| Density (20℃)g/cm3 | 1.18 min |
Usage:
poly(maleicacid) is usually used together with organic phosphonate at dosage of 1-15ppm for circulating cool water system, oilfield fill water, crude oil dewatering and low-pressure boilers. poly(maleicacid) has good scale inhibition (98%) and scale stripping properties. When used together with zinc salts, it can effectively inhibit carbon steel corrosion.
Package and Storage:
Normally In 250kg net Plastic Drum, IBC drum can also be used as required.Storage for one year in room shady and dry place.
Safety Protection:
Acidity, Avoid contact with eye and skin, once contacted, flush with water.
Synonyms:
HPMA; Hydrolyzed Polymaleic Anhydride; poly(maleicacid);MALEIC ACID POLYMER;maleic acid homopolymer