Main Products
- Polycarboxylic antiscale and dispersant
- Polyacrylic Acid (PAA)
- Polyacrylic Acid Sodium (PAAS)
- Hydrolyzed Polymaleic Anhydride (HPMA)
- Copolymer of Maleic and Acylic Acid (MA/AA)
- Acrylic Acid-2-Acrylamido-2-Methylpropane Sulfonic Acid Copolymer (AA/AMPS)
- Acrylic Acid-2-Hydroxypropyl Acrylate Copolymer (T-225)
- Acrylic Acid/Acrylate/Phosphonic Acid/Sulfosalt Tetra-copolymer (TH-241)
- TH-613 Acrylic-acrylate-sulfosalt copolymers
- Copolymer of Phosphono and carboxylic Acid (PCA)
- TH-1100 Sodium Polyacrylate
- TH-2000 Modified Sodium Polyacrylate
- TH-3100 carboxylate-sulfonate-nonion tri-polymer
- TH-904 aqueous dispersant
- Polycarboxylic Acid Water-Reducing Agent
- Polyepoxysuccinic Acid (PESA)
- Sodium of Polyaspartic Acid (PASP)
- Organophosphoric Antiscale and Corrosion Inhibitors, Chelants
- Organophosphoric Salts
- Bactericide and Algicide
- Built Scale & Corrosion Inhibitors and Pretreatment Filming Agents
- Corrosion Inhibitor
- Reverse Osmosis Chemicals
Acrylic Acid-2-Hydroxypropyl Acrylate Copolymer
(T-225)
CAS No. 55719-33-0
Structural Formula:
Properties:
T-225 is copolymer of polyacrylic acid and hydroxypropyl acrylate, it has good scale inhibition and dispersion properties to calcium phosphate and calcium carbonate, it has good dispersion properties to ferric oxide sludge, clay and grease. T-225 can be used under high pH situation and has good compatibility with other organophosphines and BTA, T-225 can effectively withhold sediments of zinc salt and calcium phosphate, it has good scale inhibition and dispersion properties under high temperature and alkaline situations.
Specification:
| items | index | |
| Neutro | Acid | |
| Appearance | Colorless to yellow liquid | |
| Solid content % | 30.0±2.0 | 30.0±2.0 |
| Free monomer (as AA )% | 0.5 max | 0.5 max |
| pH(1% water solution) | 7.5±1.0 | 2.5±0.5 |
| Limiting viscosity number (30℃) dl/g | 0.065~0.095 | |
| Density (20℃)g/cm3 | 1.10 min | |
Usage:
T-225 can be used in circulating cool water system in situation of alkaline and excess of phosphate. It can be used as scale inhibitor and dispersant for heater, none-column evaporator boiler, circulating cool water and oilfield dirty refilling water with high calcium content. The dosage of 10~30mg/L is preferred. It can be built with organophosphines to form full organic alkaline formula.
Package and Storage:
Normally In 200kg net Plastic Drum, IBC drum can also be used as required. Storage for one year in room shady and dry place.