Main Products
- Polycarboxylic antiscale and dispersant
- Polyacrylic Acid (PAA)
- Polyacrylic Acid Sodium (PAAS)
- Hydrolyzed Polymaleic Anhydride (HPMA)
- Maleic acid homopolymer (PMA)
- Copolymer of Maleic and Acrylic Acid (MA/AA)
- Acrylic Acid-2-Acrylamido-2-Methylpropane Sulfonic Acid Copolymer (AA/AMPS)
- Acrylic Acid-2-Hydroxypropyl Acrylate Copolymer (T-225)
- Acrylic Acid/Acrylate/Phosphonic Acid/Sulfosalt Tetra-copolymer (TH-241)
- TH-613 Acrylic-acrylate-sulfosalt copolymers
- Copolymer of Phosphono and carboxylic Acid (PCA)
- TH-1100 Sodium Polyacrylate
- TH-1010 Low Molecular Weight Polyacrylate
- TH-2000 Modified Sodium Polyacrylate
- TH-3100 carboxylate-sulfonate-nonion tri-polymer
- TH-5000 Modified Sodium Polyacrylate
- TH-904 aqueous dispersant
- TH-361 Polycarboxylate
- Scale Inhibitor for Black Liquid Evaporator In Papermaking
- Ceramic dispersant TH-908
- Carboxylate-sulfonate-nonion terpolymer
- Polyepoxysuccinic Acid (PESA)
- Sodium of Polyaspartic Acid (PASP)
- Organophosphoric Antiscale and Corrosion Inhibitors, Chelants
- Organophosphoric Salts
- Bactericide and Algicide
- Built Scale & Corrosion Inhibitors and Pretreatment Filming Agents
- Corrosion Inhibitor
- Oxygen Scavenger
- Reverse Osmosis Chemicals
- Other
TH-613 Acrylic-acrylate-sulfosalt copolymers
Properties:
TH-613 is a scale inhibitor and dispersant containing sulfosate and polyelectrolyte. In this copolymer, there exists strong acid, weak acid and non-ion group, it is suitable to be used in high temperature, high pH, high hardness and high alkaline. TH-613 has good scale inhibition for ferric oxide, calcium phosphate, zinc phosphate and calcium carbonate. It has good synergic effect with polyphosphate, zinc salt and other agents.
TH-613 can be used as scale inhibitor and dispersant in industrial circulating water system, oilfield refill water system and boiler water.
Specification:
| items | index |
| Appearance | Colorless or light yellow transparent liquid |
| Solid content % | 30.0min |
| Free monomer （as AA）% | 0.5max |
| Density (20℃)g/cm3 | 1.10 min |
| pH(1% water solution) | 4.0-5.0 |
Usage:
The dosage of 2~40mg/L is preferred depended on water quality and process.
Package and Storage:
200L plastic drum,IBC(1000L),customers’ requirement. Storage for ten months in shady room and dry place.
Safety Protection:
Weak acidity, avoid contact with eye and skin, once contacted, flush with water.