Main Products
- Polycarboxylic antiscale and dispersant
- Polyacrylic Acid (PAA)
- Polyacrylic Acid Sodium (PAAS)
- Hydrolyzed Polymaleic Anhydride (HPMA)
- Maleic acid homopolymer (PMA)
- Copolymer of Maleic and Acrylic Acid (MA/AA)
- Acrylic Acid-2-Acrylamido-2-Methylpropane Sulfonic Acid Copolymer (AA/AMPS)
- Acrylic Acid-2-Hydroxypropyl Acrylate Copolymer (T-225)
- Acrylic Acid/Acrylate/Phosphonic Acid/Sulfosalt Tetra-copolymer (TH-241)
- TH-613 Acrylic-acrylate-sulfosalt copolymers
- Copolymer of Phosphono and carboxylic Acid (PCA)
- TH-1100 Sodium Polyacrylate
- TH-1010 Low Molecular Weight Polyacrylate
- TH-2000 Modified Sodium Polyacrylate
- TH-3100 carboxylate-sulfonate-nonion tri-polymer
- TH-5000 Modified Sodium Polyacrylate
- TH-904 aqueous dispersant
- TH-361 Polycarboxylate
- Scale Inhibitor for Black Liquid Evaporator In Papermaking
- Ceramic dispersant TH-908
- Carboxylate-sulfonate-nonion terpolymer
- Polyepoxysuccinic Acid (PESA)
- Sodium of Polyaspartic Acid (PASP)
- Organophosphoric Antiscale and Corrosion Inhibitors, Chelants
- Organophosphoric Salts
- Bactericide and Algicide
- Built Scale & Corrosion Inhibitors and Pretreatment Filming Agents
- Corrosion Inhibitor
- Oxygen Scavenger
- Reverse Osmosis Chemicals
- Other
TH-904 aqueous dispersant
Alias: Viscosity Reduer, Water Reducer, Grind Aider
Properties:
The main composition of dispersant TH-904 is anion polymer. It can adsorb on surface of microparticles resulting in static repulsion, resulting in disperse and preventing sedimentation and coarse turn-back. TH-904 is little foaming, innocuous, non-corrosiveness and non-hazardous.
TH-904 is used as chelant in papermaking coating, building coating, concrete retarder, water reducer, woven and dyeing. Its performance can reach to that of SN-5040. Adding TH-904 to slurry during grinding process of bolus alba, lime carbonate, pottery clay, titanium pigment, French chalk, barium sulfate, coal-water slurry, etc., the viscosity can be largely reduced and the dispersed slurry is stable.
Specification:
| items | index |
| Appearance | Colorless to light yellow viscous liquid |
| Solid content % | 40.0 min |
| pH value (2% water solution) | 8.0~11.0 |
| Density (20℃)g/cm3 | 1.20 min |
| Viscosity(25℃)mpa.s | 50-400 |
Usage:
The dosage of 0.2-2% is preferred (solid/solid), the optimal dosage should be determined by experiment.
Package and Storage:
200L plastic drum,IBC(1000L),customers’ requirement. Storage for ten months in shady room and dry place.

