Main Products
- Polycarboxylic antiscale and dispersant
- Organophosphoric Antiscale and Corrosion Inhibitors, Chelants
- Organophosphoric Salts
- Bactericide and Algicide
- Built Scale & Corrosion Inhibitors and Pretreatment Filming Agents
- Corrosion Inhibitor
- Reverse Osmosis Chemicals
- TH-0100 Antiscalant and Dispersant for RO Membrane
- TH-150 Antiscalant and Dispersant for RO Membrane
- TH-200 Antiscalant and Dispersant for RO Membrane
- TH-191 Antiscalant and Dispersant for RO Membrane
- THR-2000 Antiscalant and Dispersant for RO Membrane
- THASD-200 Antiscalant and Dispersant for RO Membrane
- TH-260 Acid Detergent for RO Membrane
- TH-261 Alkali Detergent for RO Membrane
- TH-410 Bactericide for RO Membrane
- TH-416 Bactericide for RO Membrane
TH-260 Acid Detergent for RO Membrane
Properties:
1. Suitable for all aromatic polyamide membranes.
2. Low froth formula.
3. Diluent pH 3.0-4.0.
4. Liquid chemicals, mix well.
5. Can be used repeatedly.
TH-260 is an acid liquid formula, it can remove metal hydroxide, calcium carbonate and other types of scales.
Dosage:
Dilute to 1-3%(1:45)
Specification:
| items | index |
| Appearance | Amber transparent liquid |
| pH , (1% water solution) | 1.0-3.0 |
| Density (20℃)g/cm3 | 1.30±0.05 |
| Storage temperature | Not lower than -10℃ |
Usage:
（1）Check water box, pipeline and filter, change the filter material if needed.
（2）Input q.v. RO effluence to water box.
（3）Input q.v. TH-260 to water box, mix the solution with water pump, measure pH.
（4）Clean the system repeatedly, measure pH 5-20 minutes. After pH rise to 4, input q.v. TH-260 or acid, till pH not rise, meaning cleaning is end.
（5）If pollution is serious, sometimes the first batch detergent should be evacuated and the next batch should be required.
（6）Pay attention to solution temperature, don’t exceed the required temperature .
Package:
25kg per barrel.